This browser does not support the video element.
| Massey Ferguson MF 1204 | |||
| type | MF 1204 | ||
| size （Length X Width X Height） | mm | 4330×2235×2965 | |
| weight | kg | 4150 | |
| cab | / | safety cab | |
| driving type | / | 4WD | |
| axle base | mm | 2486 | |
| Wheel base（Front/rear wheels） | mm | 1670-2150/1425-2340 | |
| ground clearance | mm | 380 | |
| counter weight（Front/rear wheels ） | kg | 550/272(376) | |
| Number of gea（Forward/Backward） | / | 12+4 | |
| speed （Forward/Backward） | KM/H | 2.0-30.0/2.9-15.5 | |
| engine | brand | / | AGCO Power |
| Getter method | / | Turbocharged, medium cold | |
| type | / | high pressure common rail | |
| number of cylinders | cylinders | 4 | |
| displacement | L | 4.4 | |
| rated power | HP | 120 | |
| rated speed | R/M | 2200 | |
| Type of air filter | / | dry-type | |
| Fuel tank capacity | L | 145 | |
| Steering, brake | Steering system type | / | Hydraulic steering of front wheel |
| Brake system | / | Wet disc, hydraulic control | |
| drive system | Clutch type | / | 13"dry-type |
| Transmission type | / | 12+4 | |
| Gearbox shift mode | / | Partial synchronizer shifts gear | |
| working device | Type of suspension | / | Ⅱ type |
| accommodation mode | / | Position adjustment, force position comprehensive adjustment | |
| Lifting power (ball head) | KG | 3200 | |
| Type of hydraulic oil pump | / | Gear pump + plunger pump | |
| Hydraulic output device | / | Postposition, two groups | |
| Full open pressure of relief valve | MPa | 21.1±0.7（Lifting）/17.0±0.5（Hydraulic output） | |
| Type of power output shaft | / | Postset, independent type | |
| Number of splines on power output shaft | key | ~8/21 | |
| Power output shaft speed | R/M | 540/1000 | |
| tyre | Tire model（Front wheel/rear wheel） | / | 14.9-24/18.4-34 |