This browser does not support the video element.
New Holland SNH1204 tractor is the latest product with the introduction of foreign technology. This machine incorporates the concept of modern automobile design into the product. The main and auxiliary clutches, differential speed, and front drive are all operated by electronically controlled hydraulics, and the steering wheel operating angle is adjustable. The instrument adopts an alarm device, and the introduction of more humane elements meets China's current various use needs. It is an energy-saving, environmentally friendly, and a model that conforms to the new era.
1. The well-known Deutz diesel engine is adopted, which has low fuel consumption, reliable performance, high supercharging power, good emission, energy saving and environmental protection.
2. The gearbox adopts helical gears, with good meshing, low noise, low power consumption and long service life.
3, 12+12 synchronizer shift and handle are all set on the right side, easy to operate.
4. Separate silence and exhaust, two-stage balance. The cabin air is filtered and the paint does not contain benzene, which fully reflects the concept of environmental protection.
5. The clutch adopts the main and auxiliary operation to separate, which reduces the stopping time of the ground in the field operation.
6. The hydraulic lifting can be equipped with two sets of boosters, so that the lifting force can reach up to 3 tons. The suspension part is adjusted by a 3-hole suspension and a floating slot. The 1, 2, and 4 hydraulic outputs can be selected, reflecting the designer's full service Consider the idea.
7.Circuit hydraulic control four-wheel drive, differential lock, auxiliary clutch,easy and convenient operation.
New Holland SNH1204 tractor technical parameters | |
Model | SNH1204 |
Engine model | WP6T120E20 |
Rated power (kw) | 91 |
Rated speed (rpm) | 2200 |
Fuel consumption (g/kw·h) | ≤240 |
Torque reserve (%) | ≥30% |
Number of stalls | 12F+12R |
Maximum lifting force (KN) | 28.9 |
PTO shaft speed (rpm) | 540/1000 |
Maximum traction (KN) | 40 |
Front wheel size | 14.9-28 |
Rear wheel size | 18.4-38 |
Total length (mm) | 4830 |
Overall width (mm) | 2300 |
To exhaust pipe height (mm) | 3100 |
Minimum ground clearance (mm) | 407 |
Structure mass (kg) | 4850 |